School of Drafting and Design
School of Drafting and Design

Drafting and Design Technology: Associate of Applied Science Degree
Newburgh, IN Campus

Course Descriptions

DT1110 Introduction to Drafting and Design Technology | 4.5 credit hours

This course introduces technical drafting and design practices. Topics include lettering, metric construction, technical sketching, orthographic projection, sections, intersections, development, fasteners, theory and applications of dimensioning and tolerances, pictorial drawing, and the preparation of working and detailed drawings.

dividing line

DT1210 Rapid Visualization Techniques | 4.5 credit hours

This course introduces the concepts of rapid communication of design topics utilizing techniques of freehand drawing and their application to technical sketching and design visualization. Hands-on projects include drawing of two- and three-dimensional shapes and objects, spatial thinking and eye-hand coordination in relation to the practice of drafting and design.

dividing line

DT1230 CAD Methods | 4.5 credit hours

This course examines computer-aided drafting (CAD) techniques utilizing CAD equipment. Hands-on projects include geometric construction, various projections, sections, auxiliaries, dimensioning, sketching, and detail drawing that is practiced and applied using proper CAD procedures. Maintenance of CAD drawing files through the use of operating system commands is applied and stressed. Prerequisite: DT1110 Introduction to Drafting and Design Technology or equivalent

dividing line

DT1320 Building Information Modeling BIM | 4.5 credit hours

This course examines architectural planning and design utilizing Building Information Management (BIM) techniques. Fundamental design methods and practices for the creation of architectural drawings are presented, with emphasis on the content of the drawings and the production skills. Topics include the development of floor plans, elevations and sections of building projects. Prerequisite: DT1230 CAD Methods or equivalent

dividing line

DT1325 Sustainability in Design | 4.5 credit hours

In this course, students investigate the challenges of implementing sustainability in a variety of contexts, from the perspectives of climate change, energy use, natural resource use and ecosystems/land use. Students explore current trends of sustainability as it applies to design, manufacturing and building. Topics include materials, manufacturing techniques, new technologies, renewable resources and product life cycle analysis. Prerequisite: DT1230 CAD Methods or equivalent

dividing line

DT1410 Materials and Processes in Design | 4.5 credit hours

This course emphasizes the materials and processes used in manufacturing and construction. Students are introduced to a variety of construction and manufacturing materials, machine tools and tooling used in a variety of processes. Emphasis is placed on terminology and function.

dividing line

DT1430 Parametric Modeling | 4.5 credit hours

This course examines the creation of parametric models utilizing design software. Topics include working with constrained geometry, creating and documenting assemblies, and advanced part modeling techniques. Prerequisite: DT1230 CAD Methods or equivalent

dividing line

DT2510 Advanced CAD Methods | 4.5 credit hours

This is a course in computer-aided design for the advanced CAD user. Students utilize a typical CAD system to design and analyze mechanical systems, architectural structures and other devices. This course renforces CAD skills studied in the CAD Methods course. Prerequisite: DT1230 CAD Methods or equivalent

dividing line

DT2520 3D Civil Drafting | 4.5 credit hours

This course provides an introduction to civil drafting and design using surveying and engineering data to draw civil engineering plans. Topics include legal descriptions, plan and profile drawings, topographic mapping, cross-sections and required calculations. Prerequisite: DT1430 Parametric Modeling or equivalent

dividing line

DT2630 3D Modeling and Visualization | 4.5 credit hours

This course explores 3D modeling, the application of realistic textures, lighting principles and techniques for the use of camera types. An emphasis is placed on industry trends and issues pertaining to rendering output for different mediums. Prerequisites: DT1320 Building Information Modeling (BIM) or equivalent, DT1430 Parametric Modeling or equivalent

dividing line

DT2799 Drafting and Design Technology Capstone Project | 4.5 credit hours

An introduction to the theory and practical development, planning, management and presentation of a drafting project from start to finish. Topics include techniques of project planning, project design and execution, documentation and presentation. Students are required to apply project management techniques to a Capstone Project. Prerequisites: Completion of a minimum of 75 credits earned in the program of study including DT1320 Building Information Modeling (BIM) or equivalent and DT1430 Parametric Modeling or equivalent

dividing line

EN1320 Composition I | A 4.5 credit hour Composition course

This course examines phases of the writing process, with emphasis on the structure of writing and techniques for communicating clearly, precisely and persuasively. Prerequisite: GS1145 Strategies for the Technical Professional or equivalent

dividing line

ES2555 Survey of Economics | A 4.5 credit hour Social Science course

This course introduces basic principles of both microeconomics and macroeconomics. Prerequisites: MA1210 College Mathematics I or equivalent, EN1320 Composition I or equivalent. Students may not receive credit for both ES2555 Survey of Economics and ES2550 Microeconomics or for both ES2555 Survey of Economics and ES2560 Macroeconomics.

dividing line

GS1140 Problem Solving Theory | 4.5 credit hours

This course introduces students to fundamental principles, strategies and methods of problem solving theory.

dividing line

GS1145 Strategies for the Technical Professional | 4.5 credit hours

This course reviews characteristic and trends of the global information society including basic information processing, Internet research, other skills used by the technical professionals and techniques that can be used for independent technical learning.

dividing line

GS2520 Professional Communications | 4.5 credit hours

This course focuses on techniques of interpersonal and business communications. Students compile a portfolio and create a professional resume. Prerequisites: Completion of a minimum of 54 credits earned in the program of study including EN1320 Composition I

dividing line

GS2530 Technical Physics | 4.5 credit hours

This technical course introduces students to concepts of applied physics. Topics include electricity, magnetism, mechanics, light, dynamics and waves. This course includes a laboratory component. Prerequisite: MA1310 College Mathematics II or equivalent

dividing line

GS2747 Advanced Strategies for the Technical Professional | 3.0 credit hours

This course focuses on skills, characteristics and attitudes that contribute to professional life. Topics include personal integrity, business communication skills, teamwork and conflict resolution, financial literacy, professional work habits, networking and social media, and lifelong learning. Prerequisites: Completion of a minimum of 65 credits earned in the program of study; Prerequisite or Corequisite: GS2520 Professional Communications or equivalent

dividing line

HU1440 Rhetoric in Contemporary Culture | A 4.5 credit hour Humanities course

This course builds on the foundations of Composition I with emphasis on rhetorical structures, argumentation and research related to the humanities. Students study how to make strong arguments using written, visual and oral communication techniques. Prerequisite: EN1320 Composition I or equivalent

dividing line

MA1210 College Mathematics I | A 4.5 credit hour Mathematics course

This course focuses on fundamental mathematical concepts including quadratic, polynomial and radical equations, linear functions and their graphs, systems of linear equations, functions and their properties and matrices. Activities will include solving problems and using appropriate technological tools. Prerequisite: GS1140 Problem Solving Theory or equivalent

dividing line

MA1310 College Mathematics II | A 4.5 credit hour Mathematics course

This course will include the following concepts: exponential and logarithmic equations and functions, graphs of trigonometric functions, trigonometric equations, polar coordinates, oblique triangles, vectors and sequences. Prerequisite: MA1210 College Mathematics I or equivalent

 
  Enter your first name

Meet a Graduate

Paul Groves
Computer Drafting and Design
Associate of Applied Science

Graduated 2010
Lexington, KY

Meet Paul